FOR EASY UFS 3 IN1 & 4 IN1 & 6 IN 1

FOR EASY UFS 3 IN1 & 4 IN1 &6 IN 1

No Encryption Chip

 

1、We recommend using a regulated power supply and the USB is not required. Press and hold the power button. If the current is 100-200mA, the UFS is successfully powered on.

2、If Using USB power and battery device Manager，the presence of a CPU port is necessary . Otherwise，the UFS fails to be powered on and cannot be connected.

3、UFS2.0 2.1 2.2 should use VCC-3.3V VCCQ2-1.8V. UFS3.0 3.1 4.0 TX RX CLK RST GND all connected to Jump wire.Similar to the socket, it can no longer use USB and power supply.But it can only use the host power supply .

4、The GND TX RX signal cannot exceed 15MM. The GND wiring point should be close to TX RX as possible. Some CPU require RST signal for wiring. TX and RX must not touch the wire.